01-10 DURAMAX GDP Tuning EFI Live

R110DGP

Regular price $749.99 Save $-749.99

2001 - 2005 DSP-5 TUNING INSTALLATION

 


 

STEP 1- Plug the AutoCal directly into the trucks OBD port.

STEP 2- Turn the key to the run position, do NOT start the engine.

STEP 3- Click NEXT until you see FULL 1 DSP5 displayed on the screen. Click OK and follow the prompts on the screen. You will be asked if you want to license the ECU, click OK and wait for the download to complete. Once the download finishes you will be prompted to turn the key off, do so and then click OK. Wait for the countdown to complete, once it does the AutoCal will revert back to the menu and display FULL 1 DSP5. You may disconnect the AutoCal and start the vehicle, the tune installation process has been completed.

 

2001 - 2005 EFILIVE POWER LEVELS

Switch Position

Power Level Name

HP Rating

#1 NO POWER +20HP
#2 TOW +50HP
#3 STREET +120HP
#4 PERFORMANCE +175HP
#5 RAMPAGE +240HP

 

POWER LEVEL ADJUSTMENT

DSP-5 SWITCH: Refer to DSP-5 installation instructions.

Edge CTS/CS Insight Monitor: Refer to Edge installation instructions

DIANGOSTICS

Your AutoCal will act as a scan tool to read and clear diagnostic trouble codes.

Display DTCs

Plug the AutoCal into the trucks OBD port and turn the key to the run position. Display DTCs is the first option on the menu, click OK. The AutoCal will then display the trouble codes on the screen, if any are present.

Erase DTCs

Plug the AutoCal into the trucks OBD port and turn the key to the run position. Click NEXT until Erase DTCs is displayed and then push OK. You will be asked if you want to erase the codes, click OK.

 

2006 - 2010 DSP-5 TUNING INSTALLATION  

 


 

STEP 1- Plug the AutoCal directly into the trucks OBD port.

STEP 2- Turn the key to the run position, do NOT start the engine.

STEP 3- Click NEXT until you see FULL 1 DSP-5 displayed on the screen. Click OK and follow the prompts on the screen. You will be asked if you want to license the ECU, click OK and wait for the download to complete. Once the download finishes you will be prompted to turn the key off, do so and then click OK. Wait for the countdown to complete, once it does the AutoCal will revert back to the menu and display FULL 1 DSP-5. You may disconnect the AutoCal and start the vehicle, the tune installation process has been completed.

2006 - 2010 EFILIVE POWER LEVELS

Switch Position

Power Level Name

HP Rating

#1 NO POWER +20HP
#2 TOW +50HP
#3 STREET +120HP
#4 PERFORMANCE +175HP
#5 RAMPAGE +260HP

POWER LEVEL ADJUSTMENT

DSP-5 SWITCH

Refer to DSP-5 installation instructions.

DIAGOSTICS

Your AutoCal will act as a scan tool to read and clear diagnostic trouble codes.

Display DTCs

Plug the AutoCal into the trucks OBD port and turn the key to the run position. Display DTCs is the first option on the menu, click OK. The AutoCal will then display the trouble codes on the screen, if any are present.

Erase DTCs

Plug the AutoCal into the trucks OBD port and turn the key to the run position. Click NEXT until Erase DTCs is displayed and then push OK. You will be asked if you want to erase the codes, click OK.